3D Printed standard gauge railcars

(ex Great Western Railway region)

Non loco propelled passenger stock such as EMUs, DMUs and steam railmotors. 

---------------------------------------------------------

Description Model Scales
     
Standard Gauge    
Railcars    
GWR Q DIAG STEAM RAILMOTOR



The Q type steam railmotor, was one of the later series built, the shorter version of an R(one of which has been restored).
This is in as built/designed condition with original large side windows and no separate water filer panel. most were eventually rebuilt to later condition with smaller windows and a water filler flap/panel.

Requires chassis.

GWR Q DIAG STEAM RAILMOTOR(revised)

The Q type steam railmotor, was one of the later series built, the shorter version of an R(one of which has been restored).
This is in as rebuilt to later condition with smaller windows and a water filler flap/panel.

Requires chassis.

GWR Q1 DIAG STEAM RAILMOTOR

The Q1 type steam railmotor, was one of the later series built, the shorter version of an R(one of which has been restored).The Q1 was Swindon built, and had single type passenger doors.
This is in later condition with smaller windows and a water filler flap/panel.

Requires chassis.

GWR O DIAG STEAM RAILMOTOR

The O type steam railmotor, was one of the later series built, the longer version, earlier version of an R(one of which has been restored).
This is in as built/designed condition with original large side windows and no separate water filer panel. most were eventually rebuilt to later condition with smaller windows and a water filler flap/panel.

Requires chassis.

GWR O DIAG STEAM RAILMOTOR(revised)

The O type steam railmotor, was one of the later series built, the longer version, earlier version of an R(one of which has been restored).
This is in asrebuilt to later condition with smaller windows and a water filler flap/panel.

Requires chassis.

GWR R DIAG STEAM RAILMOTOR

The R type steam railmotor, was one of the later series built, the longer version (one of which has been restored).The R was Swindon built, and had single type passenger doors.
This is in later condition with smaller windows and a water filler flap/panel.

Requires chassis.

     

Pictures are just for reference, not of specific scaled model. 

 

All 3D printed designs by Simon Dawson (Rue d'Étropal) , currently produced to order by Shapeways. Just follow links to Shapeways pages.

 

===============================

Link to:

          3D printed standard gauge locomotives

          3D printed standard gauge rolling stock

              3D printed standard gauge railcars-ex SR

              3D printed standard gauge railcars - ex LMS

              3D printed standard gauge railcars - ex LNER

             3D printed standard gauge railcars - BR

              3D printed standard gauge railcars/trams - LT

 

        3D printed narrow gauge locomotives

            3D printed narrow gauge rolling stock

        3D printed track and accessories

        3D printed road vehicles

        3D printed modular buildings

  

>>>>>>>>>>>>>>>>>>>>>> back to 3D Printing Menu

 

 

 

 

======================================

Direct links to lists for each scale below

locomotives rolling stock
     

====================================================

Currently adding links to all my designs, all other designs please go to my Shapeways e-shop.