G45 Track - 45mm gauge (G gauge)

These track panels are designed to fit Peco code 200 rail. 
recommended for indoor use only, as plastic is not fully water proof 

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  back to Track Menu page

Description Template
P-45stg-tram-lh-point-200-1a

45mm gauge (G gauge) left hand point 60cm radius, 
30 degree angle

Print off template

 

P-45stg-tram-rh-point-200-1a

45mm gauge (G gauge) right hand point 60cm radius, 
30 degree angle

Print off template

 

P-45stg-tram-long-straight-200-1a

45mm gauge (G gauge) straight track
Print off template
P-45stg-tram-long-curve-200-1a

45mm gauge (G gauge) 60cm radius, 15 degree, curve
Print off template

T-45-wagon-turntable-200d-200-flat-1a

flat based 200mm diameter wagon turntable, suitable for gauge 1 and g gauge( 45mm gauge). Can be used in conjuction with operating base. Fits code 200 rail. Can be wired up so locos can run onto it.
 

T-45-wagon-turntable-basic-200d-200-flat-1a

basic version of 45mm gauge 200mm diameter wagon turntable. Just add surface(card?) to create desired flat surface. fits code 200 rail
 

T-45-wagon-turntable-200d-200-plus-base-flat-1a

Large wagon turntable base to operate from side. Flat surface. Suitable for gauge 1 and G gauge. 200mm diameter will fit longer wagons. Fit code 200 rail.
 

T-45-wagon-turntable-basic-200d-200-plus-base-flat

basic version of 45mm gauge 200mm diameter wagon turntable base. jusdt add flat surfaces as required(card?), can be operated from side. fits code 200 rail. suitable for gauge 1 and g gauge
 

T-45-wagon-turntable-200d-200-plusbase-giant stone

large stone surfaces 45mm gauge 200mm diameter wagon turntable base to fit code 200 rail. suitable for gauge 1.
 

T-45-wagon-turntable-200d-200-corners-flat-1a

Flat surface corners for 200mm diameter 45mm gauge wagon turntable.fits code 200 rail.
 

T-45-wagon-turntable-200d-200-corners-large-1a

large stone surfaced corners for 200mm diameter 45mm gauge(Gauge 1) .fit code 200 rail