OO9  9mm Gauge Small Turntables 

These track panels are designed to fit Peco code 100 rail. 

A way to represent a conventional turntable with pseudo pit. No need to cut hole in baseboard. 


recommended for indoor use only, as plastic is not fully water proof 

Link to :

          Mixed gauge OO9 and OO 

       OO9 9mm gauge track     

      OO9 Wagon Turntables

       >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  back to Track Menu page

Description Template

T-9-small-turntable-48d-100-wood-1a

Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely.
This version is wood topped 48mm diameter 9mm gauge . Fit code 100 rail.

Print off template 

 

T-9-small-turntable-48d-100-plus-base-1a

Alternate base to allow turntable to move 180 degrees. 46mm diameter 9mm gauge
Print off template 

T-9-small-turntable-48d-100-flat-1a

Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely.
This version is flat topped 48mm diameter 9mm gauge . Fit code 100 rail
Print off template 

T-9-small-turntable-84d-100-wood-1a

Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely.

This version is wood topped 84mm diameter 9mm gauge . Fit code 100 rail.
Print off template 

T-9-small-turntable-84d-100-plus-base-1a

A variation on the wagon turntable design, which wwould only turn through 90 degrees. To turn through 180 degrees, a circular wheel has replaced the control arm. Piano wire or similar will need to be connected to push/pull the turntable around. Connecting up wirinfg will require a reverse polarity switch or similar.
Print off template 

T-9-small-turntable-basic-84d-100-plus-base-1a

basic version of 9mm gauge 84mm diameter turntable base which can turn 180 degrees. fits code 100 rail.
Print off template