3D Printed GWR standard gauge steam railmotors

 

Description Model Scales
     
GWR Q DIAG STEAM RAILMOTOR



The Q type steam railmotor, was one of the later series built, the shorter version of an R(one of which has been restored).
This is in as built/designed condition with original large side windows and no separate water filer panel. most were eventually rebuilt to later condition with smaller windows and a water filler flap/panel.

Requires chassis.

GWR Q DIAG STEAM RAILMOTOR(revised)

The Q type steam railmotor, was one of the later series built, the shorter version of an R(one of which has been restored).
This is in as rebuilt to later condition with smaller windows and a water filler flap/panel.

Requires chassis.

GWR Q1 DIAG STEAM RAILMOTOR

The Q1 type steam railmotor, was one of the later series built, the shorter version of an R(one of which has been restored).The Q1 was Swindon built, and had single type passenger doors.
This is in later condition with smaller windows and a water filler flap/panel.

Requires chassis.

GWR O DIAG STEAM RAILMOTOR

The O type steam railmotor, was one of the later series built, the longer version, earlier version of an R(one of which has been restored).
This is in as built/designed condition with original large side windows and no separate water filer panel. most were eventually rebuilt to later condition with smaller windows and a water filler flap/panel.

Requires chassis.

GWR O DIAG STEAM RAILMOTOR(revised)

The O type steam railmotor, was one of the later series built, the longer version, earlier version of an R(one of which has been restored).
This is in as rebuilt to later condition with smaller windows and a water filler flap/panel.

Requires chassis.

 
GWR R DIAG STEAM RAILMOTOR

The R type steam railmotor, was one of the later series built, the longer version (one of which has been restored).The R was Swindon built, and had single type passenger doors.
This is in later condition with smaller windows and a water filler flap/panel.

Requires chassis.

Pictures are just for reference, not of specific scaled model. 

 

All 3D printed designs by Simon Dawson (Rue d'Étropal) . Just follow links to Cults3d pages.

 

===============================