16.5mm Narrow Gauge Wagon Turntables 

Suitable for narrow gauge on 16.5mm gauge, such as O16.5, On30 or 1/32n2 or 1/35n2

These track panels are designed to fit Peco code 100 rail. 
recommended for indoor use only, as plastic is not fully water proof 

Link to 

          16.5mm NG track

        16.5 and 9mm mixed gauge track

        16.5mm Narrow Gauge Small Turntables

          >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  back to Track Menu page

Description Template

T-165-wagon-turntable-48d-100-1a

12ft(48mm) wagon turntable, fits various surround corners. Just add code 100 rail. Can be wired up.

Print off template

T-165-wagon-turntable-48d-basic-100-1a

48mm wagon turntable with basic surface more typical of lightweight portable narrow gauge ones.

 fits various surround corners. Just add code 100 rail. Can be wired up.

Print off template
     

T-165-wagon-turntable-60d-100-1a

60mm diameter wagon turntable for OO gauge with flat surface. Fit code 100 rail 

Print off template

T-165-wagon-turntable-60d-basic-100-1a

60mm diameter wagon turntable for OO gauge with basic surface,more typical of lightweight portable narrow gauge ones.. Fit code 100 rail 

Print off template
     

T-165-wagon-turntable-84d-100-1a

plain topped 84mm wagon turntable,16.5mm gauge, suitable for longer wagons, HO or O16.5, Gn15, narrow gauge. Uses code 100 rail. 

Print off template

T-165-wagon-turntable-48d-100-corners-flat-1a

plain surfaced outside corners for 48mm diameter 16.5mm gauge wagon turntable. uses code 1oo rail 

Print off template

T-165-wagon-turntable-48d-100-corners-large-1a

very big stone surface version of 48mm diameter wagon turntable surround. 

Print off template

T-165-wagon-turntable-48d-100-plus-base-flat-1a

complete base for 48m diameter wagon turntable with flat surface. Designed so 
turntable can be operated from side using connecting bar attached. Uses code 100 rail

Print off template

T-165-wagon-turntable-48d-100-plus-base-basic-1a

complete base for 48m diameter wagon turntable with basic surface. Designed so 
turntable can be operated from side using connecting bar attached. Uses code 100 rail

Print off template
     

T-165-wagon-turntable-48d-100-plus-base-large-1a

base unit plus control lever for 48mm diameter 16.5mm gauge wagon turntable with large stone surface. use code 100 rail 

Print off template

T-165-wagon-turntable-60d-100-corners-flat-1a

outside corner panel for 60mm diameter wagon turntable , OO gauge, with flat surface. Fit code 100 rail 

Print off template

T-165-wagon-turntable-60d-100-corners-large-1a

60mm diameter wagon turntable surrounding corners with large stone surface. fit code 
100 rail

Print off template

T-165-wagon-turntable-60d-100-plus-base-basic-1a

60mm diameter wagon turntable base unit to make operating . OO gauge, Basic surface so you can add your own. Fit code 100 rail. Operating arm needs to be detached and fitted to base 

Print off template

T-165-wagon-turntable-60d-100-plus-base-flat-1a

60mm diameter wagon turntable base unit to make operating . OO gauge, Flat surface. Fit code 100 rail. Operating arm needs to be detached and fitted to base 

Print off template

T-165-wagon-turntable-60d-100-plus-base-large-1a

60mm diameter wagon turntable base unit to make operating . OO gauge, large stone 
surface. Fit code 100 rail. Operating arm needs to be detached and fitted to base 

Print off template

T-165-wagon-turntable-84d-100-corners-flat-1a

plain corner sections for 84mm diameter 16.5mm gauge wagon turntable. uses code 100 rail 

Print off template

T-165-wagon-turntable-84d-100-corners-large-1a

large stone surfaced corner sections for 84mm diameter 16.5mm gauge wagon turntable. uses code 100 rail
Print off template

T-165-wagon-turntable-84d-100-plus-base-1a

base unit, plus operating arm for 84mm diameter, 16.5mm gauge wagon turntable with 
flat surface. uses code 100 rail 


Print off template

T-165-wagon-turntable-84d-100-plus-base-large-1a

84mm diameter wagon turntable base unit to make operating . OO gauge, large stone 
surface suitable for GN15. Fit code 100 rail. Operating arm needs to be detached and fitted to base

Print off template