3D Printed Designs in Development
| Every so often someone
asks for a modified version of one of my designs.
Some of these might interest other people so here is a list of the ones I have done so far. |
| 1/16th scale spiral
staircase with extra 3 steps and top step at 210mm above floor.
left hand version https://www.shapeways.com/product/YPQ487Z6Q/s-16-spiral-stairs-17-step-lh-2a
------------------------------------------------------------------------------------- 1/100 scale spiral staircase extended so floor to top step approximately9in Left hand version
https://www.shapeways.com/product/5Y5SEPM2Z/s100-x8-spiral-stairs
1/64 scale basic/body of LTSR horsebox https://www.shapeways.com/product/R9L3XHB9A/a-64fs-basic-ltsr-d31-horsebox-body-1
============= 1/22.5 scale version of WCPR big railcar(ex Southern Railway) , without buffers so could be used for narrow gauge G scale or a smaller railcar in 16mm/ft https://www.shapeways.com/product/873T87V2K/o-22-5b-wcpr-drewry-big-railcar-1
==================
Bogies for French WW1 era Crochat I/C loco for OO9 https://www.shapeways.com/product/EZSCW3JWH/b-76-crochat-bogies
|
|
Designs by Rue d'Étropal |