OO Gauge Small Turntables 

Suitable for OO or HO, turn short locos and stock

Representing small well type turntables. No need to cut hole in baseboard. Turn 180 degrees using control wires. Can use turntable tops from wagon turntables.

These track panels are designed to fit Peco code 100 rail. 
recommended for indoor use only, as plastic is not fully water proof 

Link to 

          OO track

        OO wagon turntables

          >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>  back to Track Menu page

Description Template

T-165-small-turntable-84d-100-flat-1a

Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely.

This version is flat topped 84mm diameter 16.5mm gauge . Fit code 100 rail
Print off template

T-165-small-turntable-84d-100-wood-1a

Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely.

This version is wood topped 84mm diameter 16.5mm gauge . Fit code 100 rail.

Print off template

T-165-small-turntable-basic-84d-100-plus-base-1a

cut down basic version of 84mm diameter turntable 16.5mm gauge, which can turn 180 degrees. fits code 100 rail. Just need to fit covering surface(up to 0.5mm thick)
 
T-165-small-turntable-84d-100-plus-base-1a

A variation on the wagon turntable design, which wwould only turn through 90 degrees. To turn through 180 degrees, a circular wheel has replaced the control arm. Piano wire or similar will need to be connected to push/pull the turntable around. Connecting up wirinfg will require a reverse polarity switch or similar.
 

T-165-small-turntable-84d-100-control-disc-1a

Replacement wheel to convert 84mm diameter turntable bases so they can turn 180 degrees . Requirs some modification to turntable base.
 


T-165-small-turntable-168d-100-wood-1a

Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely.

This version is wood topped 168mm diameter 16.5mm gauge . Fit code 100 rail
Print off template

T-165-small-turntable-168d-100-flat-1a

Taking the wagon turntable a stage further to create what looks like a typical turntable with pit. The pit is flat, the whole unit is same thickness as standard track, so needs no ho;e cut in baseboard. Could be used on its own, but it fits in new 180 degrees turntable bases which raise it by 3.5mm, and can then be operated remotely.

This version is wood topped 168mm diameter 16.5mm gauge . Fit code 100 rail
Print off template


T-165-small-turntable-168d-100-plus-base-1a

A variation on the wagon turntable design, which wwould only turn through 90 degrees. To turn through 180 degrees, a simple suport arm has replaced the control arm. Piano wire or similar will need to be connected to push/pull the turntable around. Connecting up wiring will require a reverse polarity switch or similar